Fits Steer gear box stabilizer bar Brace Dodge ram 2003 2004 2005 2006 2500 3500

Fits Steer gear box stabilizer bar Brace Dodge ram 2003 2004 2005 2006 2500 3500

Fits Steer gear box stabilizer bar Brace Dodge ram 2003 2004 2005 2006 2500 3500
Dodge Ram Steering Gear Box Stabilizer. Fits on: 2003 2004 2005 2006 Dodge Ram, 2500 or 3500 - 4x4, (Gas or Cummins Diesel) 1500 MEGA CAB.

Simple upgrade that takes the slop out of your steering. DOES NOT FIT ON 2WD TRUCKS. Kit comes with everything you need for installation.

1/4 STEEL BEARING PLATE AND POWEDER COATED. Quarter inch steel is fabricated sheet-metal designs for maximum load bearing and to ensure maximum stability. SECTOR SHAFT is CNC machined from high-strength steel. HEAVY-DUTY BEARING , high-quality, pillow-block bearing that is grease-able for superior lifespan. Installation IMPORTANT NOTES: Please read before beginning installation.

OEM Manual should be used as a reference. IT IS HIGHLY RECOMMENDED THAT A CERTIFIED MECHANIC PERFORMTHIS INSTALLATION. Read and understand all the instructions before beginning installation. Before installing the Steering Stabilizer bar, inspect all steering components for signs of wear or damage. Replace worn or damaged parts as necessary. This product is NOT designed to be a replacement for a new steering box and/or ball joints and will not fix or replace worn-out steering components. The Steering Stabilizer bar is designed to reduce the stress on the steering box and extend the life of the steering components. Use Loctite® on all bolts associated with this installation.

It is the responsibility of the mechanic and customerto wear safety glasses at all times during installation, especially when working with air tools. Before installation begins, drive the vehicle and inspect it to make sure that there are not any uncommon sounds or frame damage. IMPORTANT CUSTOMER INFORMATION: It is the customers responsibility to make sure a re-torque is performed on all hardware associated with this suspension system after the first 100 miles and every 1000 miles thereafter and after every off road use. Required Tools: 15mm&17mm Socket/Wrench 3/4, 1-1/4& 1-15/16 Deep Socket/Wrench 1/8 Allen Wrench Torque Wrench (40-180 ft-lb) Torque Settings: Anti-sway bar to frame bolts 45 ft-lb Sector shaft nut 180 ft-lb End-link to frame nut 40 to 60 ft-lb Installation: 1. To begin installation block the rear tires of the vehicle so that the vehicle is stable and can notroll.

With a 15mm socket or end wrench, remove the four (4) 10mmmount the anti-sway barmounting bolts. (Two bolts per bracket) NOTE: The anti-sway bar will swing free when the bolts are removed. Allow the bar to rest on the steering linkage, but be sure to support the bar to avoid excessive load on the end links.

Remove the sector shaft nut and lock washer using a 1-5/16 socket. Retain the lock washer for re-installation.

Take care to ensure no thread damage occurs with the removal of the nut. Apply Loctite and attach the provided sector shaft nut with a 1-1/4 wrench reusing the lock washer. Hand-start the nut to ensure no crossthreading occurs. Torque sector shaft nut to spec. Slide the stabilizer bar into place, so the feet are between the frame and sway bar mounts.

Ensure that the large diameter hole on the bearing plate is approximately centered on the sector shaft nut 6. Installtwo ½ bolts through the holes in the bearing mounting plate so the threads are hanging through the bracket. Install bearing over the sector shaft nut and bolts until it comes in contact with the support bracket.

NOTE:the bearing block may not be flush to the support bracket at this point. Install lock washer and nut using a ¾ socket; snug, do nottighten. Tighten all bolts in the following order: 1. Sway bar mounting bolts-torque to spec.

The Past & The Future. Digital Pictures are Required for claim report. Item details and the problem. Please inspect all your order(s) upon receipt. ALL return Products MUST in good condition when we receive it.

The item "Fits Steer gear box stabilizer bar Brace Dodge ram 2003 2004 2005 2006 2500 3500" is in sale since Wednesday, March 16, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Pipes & Tips". The seller is "tpntf" and is located in Plano, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Indonesia, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Chile, Dominican republic, Guatemala, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Guernsey, Guadeloupe, Iceland, Jersey, Jordan, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

Fits Steer gear box stabilizer bar Brace Dodge ram 2003 2004 2005 2006 2500 3500

Gear Box Fits    Links    Contact Us    Privacy Policy Agreement    Terms of Use